_edited.png)
_edited.png)
PRE-OWNED
Jet Skis: Sea-Doo, Yamaha, and Kawasaki
At Twisted Crank every pre-owned jet ski is run-through our 6 point service checklist. We focus on verifying engine health, hull integrity, and pump components, with crucial steps including a compression test, oil/filter change, battery check, and verifying total engine hours. We inspect for corrosion, check for damaged impeller blades, and confirm all steering/reverse cables operate smoothly.
Pre-Purchase Inspection Checklist
-
Engine & Performance: Perform a compression test (essential for identifying engine health). Check for oil leaks, rust, and corroded hose clamps.
-
Jet Pump & Intake: Check the intake grate for damage, ensure the impeller is not bent or chipped, and inspect the wear ring for clearance.
-
Hull & Body: Inspect for deep gouges, cracks, or soft spots on the top and bottom.
-
Electronics & Battery: Check for a fully charged battery with no terminal corrosion. Verify that the dashboard display works and check the hour meter.
-
Safety & Maintenance: Check for a functional fire extinguisher, check steering/reverse cables, and verify that the lanyard (safety stop switch) works.
-
Trailer: Inspect trailer tires for dry rot, ensure lights work, and check bearings for grease.
ATVs & SXS: Honda, Yamaha, Polaris, Kawasaki, Arctic Cat, Suzuki, and Can-Am
At Twisted Crank our pre-owned ATV service checklist prioritizes critical safety, fluid, and mechanical checks: we inspect for damaged CV boots, check all engine and differential oil levels, verify brake functionality, examine tire tread/pressure, and replace the air filter and spark plugs. Essential maintenance includes checking for rust, tight electrical connections, and inspecting the drive belt for fraying.
Key Pre-Owned ATV Service Checklist:
-
-
Engine & Powertrain:
-
Oil & Filter: Change engine oil and filter immediately.
-
Air Filter: Clean or replace the air filter.
-
Spark Plug: Inspect or replace spark plugs.
-
Fluids: Check/replace differential fluid (front and rear) and transmission fluid.
-
Drive Belt/Chain: Inspect drive belt for cracks/fraying, or check chain tension and lube.
-
Fuel System: Check fuel lines for leaks and, if necessary, replace the fuel filter.
-
-
Chassis & Suspension:
-
CV Boots/Joints: Check for grease, rips, or torn CV boots.
-
Bearings/Suspension: Check for play in wheel bearings and inspect suspension components.
-
Tires: Inspect for dry rot, cracked sidewalls, and ensure proper tire pressure.
-
Frame: Look for cracks, rust, and damaged engine mounts.
-
-
Safety & Controls:
-
Brakes: Check brake fluid levels, pads for wear, and ensure the parking brake works.
-
Electrical: Test all lights, switches, and ensure the battery is holding a charge.
-
Kill Switch: Verify the engine kill switch operates correctly.
-
Steering: Check for loose steering components or, for EPS models, smooth operation.
-
-
Snowmobiles, Ski-Doo, Polaris, Arctic Cat and Yamaha
At Twisted Crank we perform a comprehensive pre-owned snowmobile service checklist which includes inspecting the engine (compression, spark plugs, belt), suspension (hyfax, shocks), and drivetrain (track tension, chain case oil). Key tasks are changing fluids, greasing all fittings, checking for broken bolts/leaks, and testing all electricals/brakes. Inspect for wear in the clutch, carbides, and steering components to ensure safety.
Engine and Fuel System
-
Compression Test: Essential for checking engine health.
-
Spark Plugs: Replace with new ones.
-
Fuel System: Inspect lines for cracks and replace fuel.
-
Air Intake: Clean and check for obstructions.
-
Exhaust: Check springs and mounting points.
-
Engine Oil/Coolant: Check levels and top off or change.
Drive System and Clutch
-
Drive Belt: Inspect for cracks/glazing and replace if worn.
-
Clutches: Clean, inspect, and check for proper alignment and tension.
-
Chaincase: Change lubricant.
-
Chain Tension: Adjust as needed.
Suspension and Track
-
Track: Check for tears, missing lugs, and proper tension/alignment.
-
Hyfax (Slides): Check for wear indicators.
-
Suspension/Bogey Wheels: Grease fittings and inspect for cracks or damage.
-
Shocks: Inspect for leaks and wear.
Chassis and Steering
-
Skis and Carbides: Check for wear and damage.
-
Steering: Check for looseness or damage to joints.
-
Brakes: Check pad thickness, cable, and fluid level.
-
Body Panels: Check for cracks, loose nuts, and broken bolts.
Electrical and Controls
-
Lights: Test headlights, taillight, and brake light.
-
Controls: Check throttle, brake levers, and emergency stop switch.
-
Battery: Test and charge, or replace if necessary.
-
Hand/Thumb Warmers: Ensure they heat up correctly.